Web Tension Amplifiers and Indicators
A range of digital and analogue web tension amplifiers and indicators for use wherever continuous and accurate indication of actual web tension is required. Suitable for all types of tension and force transducers
DIGITAL TENSION INDICATOR TIX-2
• Suitable for all types of tension and force transducers
• Internal adjustments for ZERO, SPAN and DISPLAY SCALING, allowing the TIX-2 to be calibrated in engineering units up to 1999.
• Internally selected links for LAST DIGIT BLANKING, as well as DISPLAY DAMPING options.
• Housed in rugged GRP case to standard DIN dimensions with plug in screw terminals for signal connections.
• Analogue output for remote indication, or for use with a control system.
DTAX TENSION AMPLIFIER WITH
DIGITAL DISPLAY 
Suitable for all types of tension and force transducers
External adjustment for ZERO
Push-button menu selection and adjustment for CALIBRATE HIGH
Dual measuring ranges as standard, LEFT, TOTAL and RIGHT outputs as standard
Housed in a rugged polycarbonate DIN rail mounted case with integral screw connections
Analogue output of both 0/+10V d.c and 4/20mA for remote indication and for use with a control system
Integral LCD meter with backlight
2700 TENSION AMPLIFIER 
• Suitable for all types of tension and force transducers
• Internal adjustments for ZERO, CALIBRATE HIGH, CALIBRATE LOW, and output filter DAMPING rate.
• Analogue output of either 0/+10V or 4/20mA, for remote indications and for use with a control system.
• Housed in rugged DIN rail mounting GRP case with removable screw connections.
• Dual measuring ranges as standard, LEFT, TOTAL and RIGHT outputs are an optional extra.
• Intrinsically safe systems for hazardous area use are available.
INDICATORS 
Tension Indicators display the actual tension in any moving web. They accept the signals from (usually) two tension transducers, one at each end of the idler roller. These signals are then processed by a calibrated amplifier and displayed to th operator as the actual web tension.
All indicators are available with either analogue or digital displays according to customer preference. In addition they are supplied with a dual range of display option, for both high and low working tensions allowing maximum sensitivity.
TYPICAL INDICATOR SYSTEM 
The left/total/right (LTR) display option allows the operator to compare the tension on either side of the web to determine the direction and magnitude of the slack edge.
DESIGN FEATURES & BENEFITS GAINED
Analogue Display - showing tension trends and fluctuations
Digital Display - showing tension values precisely
Dual Range - giving the ability of high tension use but allowing sensitivity at low tensions
LTR Function - displaying the direction and magnitude of the slack edge in the web