Analogue Tension Amplifier 2700 series
* For use wherever continuous and accurate indication of actual web tension is required
* Suitable for all types of tension and force transducers - transducer supply internally selected: 5V, 10V or 12.5Vdc
* Internal adjustments for ZERO, CALIBRATE HIGH, CALIBRATE LOW and OUTPUT FILTER DAMPING RATE
(Time constant adjustable from 0.3 to 3.5secs - configured according to requirements)
* Analogue output of either 0-10V or 4-20mA for remote indication and for use with a control system
* Dual measuring ranges as standard - selected by volt-free contact or logic level (5-24V).
LEFT, TOTAL and RIGHT outputs are an optional extra
* Housed in a rugged IP40 GRP case (h:73.2 x w:75.0 x d:118.0mm) DIN rail mounted (DIN35 EN50022), with removeable screw connections
* 110-120Vac or 220-240Vac 6VA Internally selected. Optional version available for 24Vdc supply at 100mA
* Input sensitivity: 16V/V min to 4000V/V max on HIGH range - additional gain up to 5X on LOW range
* Temperature range: 0-40degC
* Intrinsically safe systems for hazardous areas are available
For further information : CMC 2700 datasheet